Step 2 Internet Access Pppoe - ZyXEL Communications ZyWall USG 50-H Series User Manual

Table 10 PPPoE Encapsulation: Static (continued)
LABEL
First DNS Server
Second DNS
Server
Next

4.3.6 Step 2 Internet Access PPPoE

Enter the Internet access information exactly as given to you by your ISP.
4.3.6.1 ISP Parameters
Type the PPPoE Service Name from your service provider.
Type the User Name given to you by your ISP.
Type the Password associated with the user name.
Select Nailed-Up if you do not want the connection to time out. Otherwise, type the Idle
Timeout in seconds that elapses before the router automatically disconnects from the PPPoE
server.
4.3.6.2 WAN IP Address Assignments
You do not configure this section if you selected Auto as the IP Address Assignment in the
previous screen.
WAN Interface: This is the number of the interface that will connect with your ISP.
Zone: This is the security zone to which this interface and Internet connection will belong.
IP Address: Enter your (static) public IP address.
DNS Server: The Domain Name System (DNS) maps a domain name to an IP address and
vice versa. Enter a DNS server's IP address(es). The ZyWALL uses these (in the order you
specify here) to resolve domain names for VPN, DDNS and the time server.
ZyWALL USG 50-H User's Guide
DESCRIPTION
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to
access it.
Click Next to continue.
Chapter 4 Wizard Setup
57