ZyXEL Communications ZyWall USG 50-H Series User Manual page 631

Table 248 Interface Logs (continued)
LOG MESSAGE
"Interface cellular%d
is configured with
incorrect phone
number.
"Interface cellular%d
is configured with
incorrect username or
password.
"Interface cellular%d
is configured with
device %s, but current
inserted device is %s.
"Cellular device [%s
%s] has been inserted
into %s.
"Cellular device [%s
%s] has been removed
from %s.
Interface cellular%d
required
authentication
password.Please set
password in cellular%d
edit page.
Table 249 WLAN Logs
LOG MESSAGE
Wlan %s is enabled.
Wlan %s is disabled.
Wlan %s has been
configured.
Interface %s has been
configured.
Interface %s has been
deleted.
Create interface %s
has failed. Wlan
device does not exist.
System internal error.
No 802.1X or WPA
enabled!
System internal error.
Error configuring WPA
state!
ZyWALL USG 50-H User's Guide
DESCRIPTION
The listed cellular interface (%d) does not have the correct phone
number configured.
The listed cellular interface (%d) does not have the correct user name
and password configured.
The listed cellular interface (%d) is configured for a particular cellular
device (first %s), but a different cellular device (second %s) is inserted.
The cellular device (identified by its manufacturer and model) has been
connected to the specified slot.
The cellular device (identified by its manufacturer and model) has been
removed from the specified slot.
You need to manually enter the password for the listed cellular
interface (%d).
DESCRIPTION
The WLAN (IEEE 802.11 b and or g) feature has been turned on. %s
is the slot number where the WLAN is (internal).
The WLAN (IEEE 802.11 b and or g) feature has been turned off. %s
is the slot number where the WLAN card is (internal).
The WLAN (IEEE 802.11 b and or g) feature's configuration has been
changed. %s is the slot number where the WLAN card is (internal).
The configuration of the specified WLAN interface (%s) has been
changed.
The specified WLAN interface (%s) has been removed.
The wireless device failed to create the specified WLAN interface
(%s). Remove the wireless device and reinstall it.
IEEE 802.1x or WPA is not enabled.
The ZyWALL was not able to configure the wireless device to use
WPA. Remove the wireless device and reinstall it.
Appendix A Log Descriptions
631