The Service Group Add/Edit Screen - ZyXEL Communications ZyWall USG 50-H Series User Manual

Table 171 Object > Service > Service Group (continued)
LABEL
Description
Add icon

30.3.1 The Service Group Add/Edit Screen

The Service Group Add/Edit screen allows you to create a new service group or edit an
existing one. To access this screen, go to the Service Group screen (see
466), and click either the Add icon or an Edit icon.
Figure 381 Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Table 172 Object > Service > Service Group > Edit
LABEL
Name
Description
Available
Member
ZyWALL USG 50-H User's Guide
DESCRIPTION
This field displays the description of each service group, if any.
This column provides icons to add, edit, and remove service groups.
To add a service group, click the Add icon at the top of the column. The Service
Group Add/Edit screen appears.
To edit a service group, click the Edit icon next to the service group. The Service
Group Add/Edit screen appears.
To delete a service group, click on the Remove icon next to the service group. The
web configurator confirms that you want to delete the service group.
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
Enter a description of the service group, if any. You can use up to 60 printable
ASCII characters.
This field displays the names of the service and service group objects that can be
added to the service group.
Select service and service group objects that you want to be members of this group
and click the right arrow to add them to the member list.
This field displays the names of the service and service group objects that have
been added to the service group. The order of members is not important. To
remove members, select them and click the left arrow.
Chapter 30 Services
Section 30.3 on page
467