ZyXEL Communications ZyWall USG 50-H Series User Manual page 605

Table 234 ADP Logs (continued)
LOG MESSAGE
ADP profile <name> has
been changed to <name>.
ADP profile <name> has
been created.
ADP profile <name> has
been modified.
Packet payload length
is over the maximum
system handle length
LAND attack packet.
Source IP is the same
as Destination IP.
Table 235 User Logs
LOG MESSAGE
%s %s from %s has
logged in ZyWALL
%s %s from %s has
logged out ZyWALL
%s %s from %s has been
logged out ZyWALL (re-
auth timeout)
%s %s from %s has been
logged out ZyWALL
(lease timeout)
%s %s from %s has been
logged out ZyWALL (idle
timeout)
Console has been put
into lockout state
Address %u.%u.%u.%u has
been put into lockout
state
ZyWALL USG 50-H User's Guide
DESCRIPTION
An ADP rule's name has been changed from first <name> to the
second <name>.
An ADP profile with the specified name has been added.
The ADP rule with the specified name has been changed.
The ZyWALL's ADP feature detected a packet with a length over
16000 bytes.
The ZyWALL's ADP feature detected traffic with the same IP address
set as both the source and the destination.
DESCRIPTION
A user logged into the ZyWALL.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS,
FTP, Telnet, SSH, or console).
A user logged out of the ZyWALL.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS,
FTP, Telnet, SSH, or console).
The ZyWALL is signing the specified user out due to a re-
authentication timeout.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS,
FTP, Telnet, SSH, or console).
The ZyWALL is signing the specified user out due to a lease timeout.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS,
FTP, Telnet, SSH, or console).
The ZyWALL is signing the specified user out due to an idle timeout.
1st %s: The type of user account.
2nd %s: The user's user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS,
FTP, Telnet, SSH, or console).
Too many failed login attempts were made on the console port so
the ZyWALL is blocking login attempts on the console port.
Too many failed login attempts were made from an IP address so the
ZyWALL is blocking login attempts from that IP address.
%u.%u.%u.%u: the source address of the user's login attempt
Appendix A Log Descriptions
605