ZyXEL Communications ZyWall USG 50-H Series User Manual page 76

Chapter 4 Wizard Setup
Table 19 VPN Advanced Wizard: Step 4 (continued)
LABEL
Policy Setting
Local Policy (IP/
Mask)
Incoming Interface
Remote Policy (IP/
Mask)
Property
Nailed-Up
Back
Next
This read-only screen shows the status of the current VPN setting. Use the summary table to
check whether what you have configured is correct.
Figure 40 VPN Advanced Wizard: Step 5
76
DESCRIPTION
Type a static local IP address that corresponds to the remote IPSec router's
configured remote IP address.
To specify IP addresses on a network by their subnet mask, type the subnet
mask of the LAN behind your ZyWALL.
Select an interface from the drop-down list box to have packets encrypted by
the remote IPSec router to enter the ZyWALL via this interface.
If Any displays in this field, it is not configurable for the chosen scenario.
If this field is configurable, type a static local IP address that corresponds to the
remote IPSec router's configured local IP address.
To specify IP addresses on a network by their subnet mask, type the subnet
mask of the LAN behind the remote gateway.
This displays for the site-to-site and remote access client role scenarios. Select
this to have the ZyWALL automatically renegotiate the IPSec SA when the SA
life time expires.
Click Back to return to the previous screen.
Click Next to continue.
ZyWALL USG 50-H User's Guide