Chapter 8 Interface
underlying interface is a member of a bridge. You also cannot add an Ethernet interface or VLAN interface
to a bridge if the member interface has a virtual interface or PPPoE/PPTP interface on top of it.
Finding Out More
• See
Section 5.2 on page 80
and zones in the ZyWALL.
• See
Section 5.4.2 on page 83
• See
Section 8.16 on page 213
• See
Section 6.1 on page 93
• See
Section 6.2 on page 94
• See
Section 6.3 on page 95
• See
Section 6.4 on page 97
• See
Chapter 9 on page 217
8.2 The Interface Status Screen
This screen lists all of the ZyWALL's interfaces and gives packet statistics for them. Click
Network > Interface to access this screen.
Figure 125 Network > Interface > Status
150
details on the differences between physical ports, interfaces,
for related information about the Interface screens.
for background information on interfaces.
for an example of configuring Ethernet interfaces.
for an example of configuring port roles.
for an example of configuring a cellular (3G) interface.
for an example of configuring a WLAN interface.
to configure load balancing using trunks.
ZyWALL USG 50-H User's Guide