26.3 Configuring the Default L2TP VPN Connection Example
1 Click VPN > Network > IPSec VPN to open the screen that lists the VPN connections.
Click the Default_L2TP_VPN_Connection's Edit icon.
Figure 244 VPN > IPSec VPN > VPN Connection > Edit
2 Enforce and configure the local and remote policies.
• For the Local Policy, create an address object that uses host type and contains the My
Address IP address that you configured in the Default_L2TP_VPN_GW. The
address object in this example uses IP address 172.23.37.205 and is named
L2TP_IFACE.
• For the Remote Policy, create an address object that uses host type and an IP address
of 0.0.0.0. It is named L2TP_HOST in this example.
3 Click the Default_L2TP_VPN_Connection entry's Enable icon and click Apply to
turn on the entry.
ZyWALL USG 300 User's Guide
Chapter 26 L2TP VPN Example
353