Configuring The Vlan Summary Screen - ZyXEL Communications ZyWall USG 50-H Series User Manual

Each VLAN interface is created on top of only one Ethernet interface.
Otherwise, VLAN interfaces are similar to other interfaces in many ways. They have an IP
address, subnet mask, and gateway used to make routing decisions. They restrict bandwidth
and packet size. They can provide DHCP services, and they can verify the gateway is
available.

8.13.1 Configuring the VLAN Summary Screen

This screen lists every VLAN interface and virtual interface created on top of VLAN
interfaces. To access this screen, click Network > Interface > VLAN.
Figure 156 Network > Interface > VLAN
Each field is explained in the following table.
Table 67 Network > Interface > VLAN
LABEL
#
Name
Port/VID
IP Address
Mask
ZyWALL USG 50-H User's Guide
DESCRIPTION
This field is a sequential value, and it is not associated with any interface.
This field displays the name of the interface.
For VLAN interfaces, this field displays:
• The Ethernet interface on which the VLAN interface is created.
• The VLAN ID.
• This field is blank for virtual interfaces.
This field displays the current IP address of the interface. If the IP address is
0.0.0.0, the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address (STATIC)
or dynamically assigned (DHCP). IP addresses are always static in virtual
interfaces.
This field displays the interface's subnet mask in dot decimal notation.
Chapter 8 Interface
199