C
H A P T E R
24.1 Overview
6
L2TP VPN
lets remote users use the L2TP and IPSec client software included with their
computers' operating systems to securely connect to the network behind the ZyWALL. The
remote users do not need their own IPSec gateways or VPN client software.
Figure 279 L2TP VPN Overview
24.1.1 What You Can Do in the L2TP VPN Screens
• Use the L2TP VPN screen (see
L2TP VPN settings.
• Use the L2TP VPN screen (see
ZyWALL's connected L2TP VPN sessions.
24.1.2 What You Need to Know About L2TP VPN
The Layer 2 Tunneling Protocol (L2TP) works at layer 2 (the data link layer) to tunnel
network traffic between two peers over another network (like the Internet). In L2TP VPN, an
IPSec VPN tunnel is established first and then an L2TP tunnel is built inside it. See
on page 307
for information on IPSec VPN.
IPSec Configuration Required for L2TP VPN
You must configure an IPSec VPN connection for L2TP VPN to use (see
307
for details). The IPSec VPN connection must:
• Be enabled.
• Use transport mode.
6.
This feature is to be supported in firmware version 2.16(BDL.2).
ZyWALL USG 50-H User's Guide
L2TP VPN
Section 24.2 on page
365) to configure the ZyWALL's
Section 24.3 on page
366) to display and manage the
24
Chapter 19
Chapter 19 on page
363