ZyXEL Communications ZyWall USG 50-H Series User Manual page 625

Table 246 NAT Logs (continued)
LOG MESSAGE
Register SIP ALG
signal port=%d failed.
Register H.323 ALG
extra port=%d failed.
Register H.323 ALG
signal port=%d failed.
Register FTP ALG extra
port=%d failed.
Register FTP ALG
signal port=%d failed.
Table 247 PKI Logs
LOG MESSAGE
Generate
X509certifiate "%s"
successfully
Generate X509
certificate "%s"
failed, errno %d
Generate certificate
request "%s"
successfully
Generate certificate
request "%s" failed,
errno %d
Generate PKCS#12
certificate "%s"
successfully
Generate PKCS#12
certificate "%s"
failed, errno %d
Prepare to import "%s"
into "My Certificate"
Prepare to import "%s"
into Trusted
Certificate"
CMP enrollment "%s"
successfully, CA "%s",
URL "%s"
CMP enrollment "%s"
failed, CA "%s", URL
"%s"
SCEP enrollment "%s"
successfully, CA "%s",
URL "%s"
ZyWALL USG 50-H User's Guide
DESCRIPTION
SIP ALG apply signal port failed.
%d: Port number
H323 ALG apply additional signal port failed.
%d: Port number
H323 ALG apply signal port failed.
%d: Port number
FTP ALG apply additional signal port failed.
%d: Port number
FTP ALG apply signal port failed.
%d: Port number
DESCRIPTION
The router created an X509 format certificate with the specified name.
The router was not able to create an X509 format certificate with the
specified name. See Table 249 on page 627
number.
The router created a certificate request with the specified name.
The router was not able to create a certificate request with the
specified name. See Table 249 on page 627
number.
The router created a PKCS#12 format certificate with the specified
name.
The router was not able to create anPKCS#12 format certificate with
the specified name. See Table 249 on page 627
error number.
%s is the name of a certificate request.
%s is the name of a certificate request.
The device used CMP to enroll a certificate. 1st %s is a request name,
2nd %s is the CA name, 3rd %s is the URL .
The device was unable to use CMP to enroll a certificate. 1st %s is a
request name, 2nd %s is the CA name, 3rd %s is the URL
The device used SCEP to enroll a certificate. 1st %s is a request
name, 2nd %s is the CA name, 3rd %s is the URL .
Appendix A Log Descriptions
for details about the error
for details about the error
for details about the
625