ZyXEL Communications ZyWall USG 50-H Series User Manual page 181

Figure 143 Network > Interface > Tunnel > Edit
Each field is explained in the following table.
Table 57 Network > Interface > Tunnel > Edit
LABEL
General Settings
Enable
Interface Properties
Interface Name
Zone
Tunnel Mode
IP Address
Assignment
IP Address
ZyWALL USG 50-H User's Guide
DESCRIPTION
Select this to enable this interface. Clear this to disable this interface.
This field is read-only and displays the name used to identify the interface within
the ZyWALL.
Use this field to select the zone to which this interface belongs. This controls
what security settings the ZyWALL applies to this interface.
This displays the tunneling protocol the interface uses (GRE).
Enter the IP address for this interface.
Chapter 8 Interface
181