Table of Contents
Advertisement
The firmware update can take up to five minutes. Do not turn off or reset the
ZyWALL while the firmware update is in progress!
Figure 455 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 213 Maintenance > File Manager > Firmware Package
LABEL
Boot
Module
Current
Version
Released
Date
File Path
Browse...
Upload
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyWALL again.
Figure 456 Firmware Upload In Process
The ZyWALL automatically reboots after a successful upload.
The ZyWALL automatically restarts causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
ZyWALL USG 50-H User's Guide
DESCRIPTION
This is the version of the boot module that is currently on the ZyWALL.
This is the firmware version and the date created.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
Chapter 37 File Manager
559
Advertisement
Table of Contents
Troubleshooting
