Configuring The Default L2Tp Vpn Connection Example - ZyXEL Communications ZyWALL USG 300 User Manual

28.3 Configuring the Default L2TP VPN
Connection Example
Click VPN > Network > IPSec VPN to open the screen that lists the VPN
1
connections. Click the Default_L2TP_VPN_Connection's Edit icon.
Figure 297 VPN > IPSec VPN > VPN Connection > Edit
Click the Policy section's Advanced button. Enforce and configure the local and
2
remote policies.
• For the Local Policy, create an address object that uses host type and
contains the My Address IP address that you configured in the
Default_L2TP_VPN_GW. The address object in this example uses the ge2
interface's IP address (172.16.1.2) and is named L2TP_IFACE.
• For the Remote Policy, create an address object that uses host type and an
IP address of 0.0.0.0. It is named L2TP_HOST in this example.
ZyWALL USG 300 User's Guide
Chapter 28 L2TP VPN Example
439