How To Set Up The Policy Route For The Vpn Tunnel - ZyXEL Communications ZyWall USG 50-H Series User Manual

Chapter 6 Tutorials
Figure 77 VPN > IPSec VPN > VPN Connection > Add

6.5.3 How to Set Up the Policy Route for the VPN Tunnel

Do the following to create a policy route to have the ZyWALL send traffic through the VPN
tunnel.
1 Click Network > Routing > Policy Route. You want this policy route to have higher
priority than the default policy route for the trunk, so click the Add icon at the top of the
column, not the one next to the existing policy route.
Figure 78 Network > Routing > Policy Route
2 Configure the policy route as shown next. This policy route applies to traffic from the
LAN1 subnet. Use the VPN connection's local and remote objects as the source address
112
ZyWALL USG 50-H User's Guide