ZyXEL Communications ZyWall USG 50-H Series User Manual page 576

Chapter 39 Reports
Figure 467 Maintenance > Report > Traffic Statistics
There is a limit on the number of records shown in the report. Please see
578 for more information. The following table describes the labels in this screen.
Table 221 Maintenance > Report > Traffic Statistics
LABEL
Data Collection
Collect Statistics
Apply
Reset
Statistics
Interface
Traffic Type
Refresh
576
DESCRIPTION
Select this to have the ZyWALL collect data for the report. If the ZyWALL has
already been collecting data, the collection period displays to the right. The
progress is not tracked here real-time, but you can click the Refresh button to
update it.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Select the interface from which to collect information. You can collect information
from Ethernet, VLAN, bridge, and PPPoE/PPTP interfaces.
Select the type of report to display. Choices are:
Host IP Address/User - displays the IP addresses or users with the most traffic
and how much traffic has been sent to and from each one.
Service/Port - displays the most-used protocols or service ports and the amount of
traffic for each one.
Web Site Hits - displays the most-visited Web sites and how many times each one
has been visited.
Each type of report has different information in the report (below).
Click this button to update the report display.
Table 222 on page
ZyWALL USG 50-H User's Guide