Digital Operator Wiring - Hyundai n 700 Instruction Manual

N700 Operating Instructions and Parts Manual
(5) The connection to the output programmable logic controller (sequencer)
2.2.4

Digital operator wiring

For operating this inverter, it can use digital operator OPE- N7.
For remote operation, remove the digital operator from the inverter and use the optional connector
cable ICS-1(3.2feet) or ICS-3(10 feet) to connect the digital operator cable. When using connector
cable, be sure to use less than 10 feet long. Otherwise, there is a danger of malfunction.
19
2. Installation and Wiring