Download  Print this page

Bosch Dinion IP 8000 MP NBN-80052 Installation Manual

Bosch dinion ip 8000 mp ip camera installation manual
Hide thumbs

Advertisement

DINION IP 8000 MP
NBN-80052 | NBN-80122
en
Installation Manual

Advertisement

Table of Contents
loading

  Also See for Bosch Dinion IP 8000 MP NBN-80052

  Summary of Contents for Bosch Dinion IP 8000 MP NBN-80052

  • Page 1 DINION IP 8000 MP NBN-80052 | NBN-80122 Installation Manual...
  • Page 3: Table Of Contents

    Connection Network (and PoE power) Auxiliary power Alarm Audio Video monitor Data Configuration Setting the field of view 7.1.1 Camera install wizard 7.1.2 Using the install wizard True Day/Night switching Camera configuration Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 4 | Table of Contents DINION IP 8000 MP 7.3.1 Bosch Video Client Browser connection 7.4.1 Establishing the connection 7.4.2 Protected network Troubleshooting Function test Resolving problems Testing the network connection Customer service Terminal program Maintenance Cleaning Repair Reset Decommissioning 10.1...
  • Page 5: Safety

    (NEC 800 CEC Section 60) or applicable local codes. Caution! Use only a +12 VDC power supply as an auxiliary power source. The auxiliary power supply unit must be isolated from earth. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 6: Important Safety Instructions

    Unless qualified, do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel. Install in accordance with the manufacturer's instructions in accordance with applicable local codes. Use only attachments/accessories specified by the manufacturer. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 7: Fcc And Ices Compliance

    The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 8: Notices

    Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of losing information, we recommend multiple, redundant recording systems, and a procedure to back up all analog and digital information.
  • Page 9: Short Information

    All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 10: System Overview

    The DINION IP starlight 8000 MP has three application variants: – 5MP (16:9) – 5MP (4:3) – 1080p The DINION IP ultra 8000 MP has three application variants: – 4K UHD – 12MP (4:3) – 1080p 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 11: Using The Camera

    The camera recording and storage functions include local alarm recording and recording to iSCSI-based systems. The camera can also use the Bosch Video Recording Manager (VRM) to control recording and storage. Integration with the many Bosch recording solutions is seamless.
  • Page 12: Operation With External Systems

    IP network. It is designed to work with Bosch security products as part of a total video surveillance management system. 2014.09 | v1.0 | AM18-Q0665...
  • Page 13: Planning

    Verify that all parts are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packaging is the safest container in which to transport the unit and can be used if returning the unit for service.
  • Page 14: Installation

    This procedure is only required for cameras not having a factory fitted lens. Notice! Lenses weighing more than 0.5 kg (1.1lbs) must be separately supported. DC iris lens Damp - Damp + 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 15 If a short circuit is detected on the lens connector, the lens circuit is automatically disabled to avoid internal damage. In this case, remove the lens connector and check the pin connections. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 16: Mounting The Camera

    Do not expose the image sensors to direct sunlight. Do not obstruct the free flow of air around the camera. 1/4”-20 UNC The camera can be mounted either from the top or from the bottom (1/4" 20 UNC thread). 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 17: Local Storage

    MENU CVBS Unscrew the card slot cover. Slide the memory card into the slot until it locks in place. Screw the cover into place to seal the slot. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 18: Connection

    Power-over-Ethernet can be connected at the same time as a 12 VDC power supply. If auxiliary power (12 VDC) and PoE is applied simultaneously, the camera selects PoE and shuts off the auxiliary input. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 19: Auxiliary Power

    (must be 16-22 AWG stranded wire or 16-26 AWG solid wire). Loosen the screws of the supplied 2-pole connector and insert the stripped wires, then tighten the screws again. Insert the 2-pole connector into the camera power socket. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 20: Alarm

    Alarm out Use the alarm output for switching external devices such as lamps or sirens. Alarm output switching capability: – Max. voltage 30 VAC or +40 VDC. Max. 0.5 A continuous, 10 VA. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 21 A zero potential make-contact or switch can be used as the actuator (use a bounce-free contact system). Note: If IR illumination is used, the alarm interface provides a stable switching control of the day/night function of the camera. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 22: Audio

    Audio output: Line output level (not suitable for direct speaker connection); impedance 1.5 kOhm minimum; 0.85 Vrms maximum output voltage. Wiring: Use shielded audio connection cable with advised maximum cable lengths for audio line input and output levels. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 23: Video Monitor

    To connect a monitor, use the optional 3 m cable (NBN- MCSMB-30M) to connect directly to the CVBS connector of a monitor. – To connect to a coax cable, use the optional 0.3 m cable (NBN-MCSMB-03M). Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 24: Data

    This data connection supports RS485, RS422, and RS232. Note: To ensure surge and electrostatic protection, keep the cable length between the camera and external device to less than 3 meters. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 25: Configuration

    When there is a choice in the wizard, the options are selected by either a short press or a longer press of the MENU button. Select EXIT to close the wizard. Notice! Changing the application variant overwrites your camera settings with the factory defaults. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 26: Using The Install Wizard

    When the variant is set correctly, briefly press MENU to continue to the following screen: Lens type: DC Iris State: Ready Focus indicator: 8 CONTINUE 180° ROTATE Timeout: 300 < press short > < press long > 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 27 11. If the camera is not in focus, press MENU for a longer time to restart the wizard. 12. If the camera is correctly focused, briefly press MENU to exit the wizard. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 28 180° ROTATE Timeout: 300 < press short > < press long > To rotate the image 180°, press MENU for a longer time until the image flips. Briefly press MENU to continue. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 29 The progress is shown on the monitor. If the camera is not in focus, press MENU for a longer time to restart the wizard. 10. If the camera is correctly focused, briefly press MENU to exit the wizard. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 30: True Day/Night Switching

    Set a different switching level to avoid this.) Note: If IR illumination is used, the alarm interface provides a stable switching control for the day/night function of the camera. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 31: Camera Configuration

    Configuration options using the menu system on the camera itself are limited to basic setup via the Wizard. 7.3.1 Bosch Video Client The Bosch Video Client is a free Windows application for viewing, operating, controlling, and administering surveillance cameras. It can be downloaded from: http://downloadstore.boschsecurity.com/...
  • Page 32: Browser Connection

    Identity and Password. Only after these have been configured can communication with the unit via the network occur. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 33: Troubleshooting

    Faulty cable Check all cables, connections. plugs, contacts and connections. Incorrect encoder Select the H.264 MP stream property set SD option on the for connection to Encoder Streams hardware decoder. configuration page. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 34 Faulty cable Check all cables, connections. plugs, contacts and connections. Incorrect Check audio configuration. parameters on the Audio configuration and LIVE page functions pages. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 35 The unit is not Power failure during Have the unit operational after programming by checked by Customer a firmware firmware file. Service and replace if upload. necessary. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 36 Active proxy server in Create a rule in the contains empty network. local computer's fields. proxy settings to exclude local IP addresses. The camera LED Firmware upload Repeat firmware flashes red. failed. upload. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 37: Testing The Network Connection

    Check the IP address, subnet mask, and gateway address. Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service. The version numbers of the internal firmware can be viewed on a service page.
  • Page 38: Terminal Program

    Enter one command at a time. When you have entered a value, such as the IP address, check the characters you have entered before pressing Enter to transfer the values to the camera. 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 39 (disconnect the power supply and switch on again after a few seconds). Additional Parameters Use the terminal program to check other basic parameters and modify them where necessary. Use the on-screen commands in the various submenus to do this. Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 40: Maintenance

    Any changes to the settings are overwritten by the factory defaults. A reset may be necessary, for example, if the unit has invalid settings that prevent it from functioning as desired. MENU CVBS 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 41: Decommissioning

    The camera should only be passed on together with this installation guide. 10.2 Disposal Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material.
  • Page 42: Technical Data

    (97+16 dB with iAE) 1080p mode 103 dB WDR (103+16 dB with iAE) Video performance – Sensitivity (3200K, 89% reflectivity, 30% IRE, F1.2) Color 5MP mode 0.0121 lx Color 1080p mode 0.00825 lx 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 43 Upright 9:16 400 x 720 (cropped) D1 4:3 (cropped) 704 x 480 480p SD Encoding: 704 x 480; Displayed: 854 x 480 432p SD 768 x 432 288p SD 512 x 288 Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 44 Dynamic Noise Reduction (iDNR) with separate temporal and spatial adjustments Contrast On/off enhancement Sharpness Sharpness enhancement level selectable Privacy Masking Four independent areas, fully programmable Video Motion Intelligent Video Analysis (IVA) Analysis 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 45 +3.3 VDC) (< 0.5 V is low; > 1.4 V is high) Alarm output 1 output Alarm output 30 VAC or +40 VDC max. voltage Maximum 0.5 A continuous, 10VA (resistive load only) Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 46 SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication Encryption TLS 1.0, SSL, DES, 3DES, AES (optional) Ethernet 10/100 Base-T, auto-sensing, half/full duplex Connectivity ONVIF Profile S, Auto-MDIX 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 47 Software Unit Configuration Via web browser or Configuration Manager Firmware update Remotely programmable Software viewer Web browser, Bosch Video Client, or third party software Optical Lens mount CS mount (C-mount with adapter ring) Lens connector Standard 4-pin DC-iris connector Focus control...
  • Page 48: Specifications (Nbn-80122)

    98 dB WDR (98+16 dB with iAE) Video performance – Sensitivity (3200K, 89% reflectivity, 30% IRE, 33 ms, F2.45), scene illumination Color (12MP / 1.932 lx 4K UHD mode) Color (1080p 0.966 lx mode) 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 49 1920 x 1080 (at 30 fps) 720p HD 1280 x 720 (at 30 fps) D1 4:3 704 x 480 (downscaled/ cropped) 480p SD Encoding: 704 x 480; Displayed: 854 x 480 432p SD 768 x 432 Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 50 Dynamic Noise Reduction (iDNR) with separate temporal and spatial adjustments Contrast On/off enhancement Sharpness Sharpness enhancement level selectable Privacy Masking Four independent areas, fully programmable Video Motion Intelligent Video Analysis (IVA) Analysis 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 51 +3.3 VDC) (< 0.5 V is low; > 1.4 V is high) Alarm output 1 output Alarm output 30 VAC or +40 VDC max. voltage Maximum 0.5 A continuous, 10VA (resistive load only) Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 52 Unit Configuration Via web browser or Configuration Manager Firmware update Remotely programmable Software viewer Web browser, Bosch Video Client, or third party software Network Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6,...
  • Page 53 870 g (1.92 lb) with 5 mm lens Color RAL 9006 Metallic Titanium Tripod Mount Bottom and top 1/4-inch 20 UNC Environmental Operating -20°C to +50°C (-4°F to 122°F) Temperature Storage -30°C to +70°C (-22°F to +158°F) Temperature Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665...
  • Page 54 | Technical data DINION IP 8000 MP Environmental Operating Humidity 20% to 93% RH Storage Humidity up to 98% RH 2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems...
  • Page 56 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven The Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2014...

This manual is also suitable for:

Dinion ip 8000 mp nbn-80122