Rotax 914 series Maintenance Manual page 60

Points of Inspection
Inspect all oil lines for damage, leakage, hardening
from heat, porosity, security of connections and at-
tachments. Verify routing is free of kinks and restric-
tions.
Inspect all fuel lines for damage, leakage, hardening
from heat, porosity, security connections and attach-
ments. Verify routing is free of kinks and restrictions.
In the case of steel fuel lines, also check for any
cracks and/or scuffing marks.
Inspect the wiring and its connections for secure fit,
damage and signs of wear.
Inspect the exhaust system for crack formation and
uncharacteristic gunpowder burns (leaks).
Check the magnetic plug at every oil change.
Check the compression by the differential pressure
method.
Test pressure________hPa (psi)
Pressure drop (% or fraction)
Cyl # 1 2
bar/psi
Inspect engine suspension and fasteners for secure
fit, including damage from heat, deformation, cracks.
Inspect screws and nuts of all external parts for tight
fit. Inspect safety wiring, replace as necessary.
Engine cleaning
Checking the air filter.
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2.) Magnetic plug
3.) Compression check
every 200 hr.
3 4
4.) Checking the engine suspension
5.) Engine external parts
6.) Engine cleaning
7.) Checking the air filter
Interval
Operating hours Reference
as
100 hr.
indicated
X 12-20-00
sec. 4)
X 12-20-00
sec. 4)
X 12-20-00
sec. 16.1)
X
X 12-20-00
sec. 14)
12-20-00
sec. 5)
X 12-20-00
sec. 3.1)
X
X 12-20-00
sec. 1)
X 12-20-00
sec. 2)
Chapter
Signature
05-20-00
page 14
January 01/2010