Rotax 914 series Maintenance Manual page 62

Points of Inspection
Flushing the cooling system where conventional cool-
ants are used.
Check the wastegate flap for free running and correct
position.
Check the wastegate bowden cable for free move-
ment and damage.
Lubricate the axle (wastegate flap).
Check the fuel filter.
Check the friction torque in free rotation on gearboxes
with overload clutch.
Actual friction torque________ Nm (in.lbs)
Gearboxes (with overload clutch).
Inspect overload clutch.
Check the propeller gearbox (with overload clutch).
Check the propeller gearbox (without overload
clutch).
Remove old oil filter from engine and install new oil fil-
ter.
Cut old oil filter without producing any metal chips and
inspect filter mat.
Findings:_________________________________
_______________________________________
Check oil tank.
Refill oil tank with approx. 3 litres of oil. For oil quality,
see Operators Manual and SI-914-019, latest edition.
(1
In the case more than 30% of operation with leaded fuel e.g.: AVGAS 100 LL 12-20-00
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Operating hours
indicated
12.) Flushing the cooling system
when replacing
the coolant
13.) Checking the wastegate flap
14.) Fuel filter (on airframe side)
15.) Checking the propeller gear box
every 600 hr.
every 1000 hr.
every 600 hr.
16.) Oil change
(1
50 hr.
(1
50 hr.
(1
50 hr.
Interval Chapter
Reference
as
100 hr.
12-20-00
sec. 11.3)
X 12-20-00
sec. 8)
X 12-20-00
sec. 8)
X 12-20-00
sec. 8)
X 12-20-00
sec. 9)
X 12-20-00
sec. 17.1)
(1
05-50-00
sec. 2)
SB-914-020
12-20-00
sec. 17.2)
12-20-00
sec. 17.2)
X 12-20-00
sec. 13.3),
13.4))
X 12-20-00
sec. 13.5)
X 12-20-00
sec. 13.2),
13.6)
sec. 13.2)
SI-914-019
Signature
05-20-00
page 16
January 01/2010