Safety - Rotax 914 series Maintenance Manual

3) Safety

Although the reading of such information does not eliminate the hazard,
General note
understanding the information will promote its correct use. Always use
common workshop safety practice.
The information and components-/system descriptions contained in this
Manual are correct at the time of publication. BRP-Powertrain, however,
maintains a policy of continuous improvement of its products without
imposing upon itself any obligation to install them on its products previ-
ously manufactured.
BRP-Powertrain reserves the right at any time, and without incurring obli-
Revision
gation, to remove, replace or discontinue any design, specification, fea-
ture or otherwise.
Specifications are given in the SI metric system with the USA equivalent
Measure
in parenthesis.
This Manual uses the following symbols to emphasize particular informa-
Symbols used
tion. This information is important and must be observed.
NOTES:
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Identifies an instruction which, if not followed,
WARNUNG WARNING
may cause serious injury including the possibility
of death.
Identifies an instruction which, if not followed,
CAUTION WARNUNG
may cause minor or moderate injury.
Denotes an instruction which, if not followed, may
NOTICE
WARNUNG
severely damage the engine or other component.
Indicates supplementary information which may be
needed to fully complete or understand an instruc-
tion.
A revision bar outside of the page margin indicates a
change to text or graphic.
00-00-00
page 9
January 01/2010