Rotax 914 series Maintenance Manual page 137

Step
5
6
7
8
Replace the coolant
Graphic
Fig. 14
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
If the coolant is being replaced with a different type, (conventional coolant,
waterless coolant) the cooling system must be flushed. See chap. 12-20-00
section: 11.3).
Refill newly mixed coolant into the expansion tank (highest point of the cooling
system). See chap. 12-10-00 section: 3.1).
Fit radiator cap.
NOTES: Run the engine briefly and replenish with clean coolant as
required.
Part
1 Attachment screw (stainless steel)
2 Water pump
Procedure
1
2
Function
12-20-00
08533
page 31
January 01/2010