Preventative Maintenance; Feed Rollers; Print Cartridge - Bryce 9K-L User Manual

PREVENTATIVE
MAINTENANCE:
CLEAN PRINT CARTRIDGE, INK SURFACES AND COVERS WITH PLAIN WATER.
ALL RUBBER ROLLERS CAN BE CLEANED WITH ISOPROPYL, DENATURED & RUBBING
ALCOHOL OR WATER ONLY.
USING ANY OTHER CLEANING SOLVENTS WILL VOID ALL WARRANTIES.
Keep cleaning solvents with petroleum based products from rubber or plastic parts.
Anything but ALCOHOL or WATER will cause premature breakdown of rubber compound.

FEED ROLLERS

PRINT
CARTRIDGE
Revision A
The 9K-L Printer is designed for trouble free service with a
minimal amount of care. Periodic cleaning of the Feed Rollers,
Right Exit Roller Slider, Left Exit Roller Slider and Lower
Guide assembly will be necessary.
CAUTION!!
Lint and paper dust tends to build up on the feed rollers with
use. When the rollers are glazed or have a yellowish residue,
clean the rollers. Use alcohol to dampen a soft cotton cloth to
clean all rubber rollers.
If the print quality is unacceptable select the Purge Print Head
function from the Setup Menu (see section 6 - 21). If problems
still persist then do the following:
•
Remove the Print Cartridge (See chapter 4).
Clean the nozzles with a soft cotton cloth. Use
a dry cloth or one moistened with water to
clean the ink jet cartridge.
•
Remove problem print cartridge and install a
new print cartridge.
9K-L USERS MANUAL
P/N 90-00860-001
Troubleshooting & Maintenance
6
Section 7 -