Bryce 9K-L User Manual page 38

E.
ORIENTATION
CNTRL.
(CONTROL)
a) Automatic
b) Manual
Revision A
feature is disabled. The reason for this, is that
the edge of the lower right hand side of the
media is unknown.
Use the following steps to set the direction of
print on the media to Invert.
• Press the Enter button to select this option.
• Press the Menu button several times to
back out of the Main Menu until the printer
displays OFF LINE.
• Press the On Line button; now the printer
is ready for use.
This option allows the printer to ignore the orientation
commands sent by the computer.
Use the following steps to select the orientation control
sub-menus.
Press the Enter button to select this option.
•
• Press the + or - buttons to scroll through the
orientation options:
A) AUTOMATIC
B) MANUAL
When the Orientation Control is set to
Automatic the printer acknowledges the
orientation commands sent from the computer.
Use the following steps to set the direction of
print on the media to Automatic.
• Press the Enter button to select this option.
• Press the Menu button several times to
back out of the Main Menu until the printer
displays OFF LINE.
• Press the On Line button; now the printer
is ready for use.
Setting the Orientation to Manual notifies the
printer to use the menu settings for orientation.
9K-L USERS MANUAL
P/N 90-00860-001
Printer Menu System
Section 6 -
8