Wire Form Center Adjustment - Bryce 9K-L User Manual

Wire Form
Center
Adjustment
Revision A
• Wire Form Center Adjustment to eliminate
skewing of the media and print.
• Wire Form Height Adjustment to allow the printer
to feed media of varying density. Example: Rigid
media is set low, light weight media is set high.
• Wire Form Ramp Adjustment improves the
feeding of media by distributing the weight of the
media stack onto the feed roller.
Adjust Feed Carriage
The Feed Carriage Assembly needs to be adjusted with the
Wire Form Assembly.
1. Place a piece of the media in the bin area against the
Rear Support Plate Assembly.
2. Unlock Feed Carriage assembly by pushing locking
lever down
3. Slide Feed Carriage Assembly to the center of the
media.
4. Pull lever up to lock Feed Carriage Assembly in place.
9K-L USERS MANUAL
P/N 90-00860-001
Operating the Printer
Section 4 -
9