Operating The Printer; Power On; Installing An Ink Jet Cartridge - Bryce 9K-L User Manual

Power On

Installing
an Ink Jet
Cartridge
Revision A
The power cord is plugged in, the printer is connected to the
computer. Now you can turn the power on.
Press on the printers' ON/OFF (I/O) power
·
switch. The switch is located on the rear of the
printer next to the line cord receptacle. Press on
the symbol "I" (ON) position. The printer LCD
menu will display the printer is initializing and
will automatically go ON LINE.
The Address Printer uses an Ink Jet Cartridge for printing.
You must install the Ink Jet Cartridge before you use the
machine. To install the cartridge do the following:
Verify the LCD display message on the top line of the
·
display is either OFF LINE or ON LINE.
Open the front cover.
·
On the top Control Panel, depress Replace Print
·
Cartridge button (plus button) and the carriage will
travel to the center position and stop. DO NOT
MOVE THE CARRIAGE BY HAND!! Damage may
occur to the carriage.
9K-L USERS MANUAL
P/N 90-00860-001

Operating the Printer

Section 4 -
1