Bryce 9K-L User Manual page 145

baud rate
The rate at which data is transferred between the computer and the printer. The computer and
printer must be set at the same baud rate for information to transfer correctly.
cable
Wires that carry the information between the computer and the printer.
Centronic parallel interface
A device for connecting printers and other peripheral devices to a computer. It transmits a
full byte at a time.
Character
A printable letter or symbol.
character height
The height of a uppercase letter. A character height is measured in points.
characters per inch
The number of character printed in a horizontal inch. Also called pitch.
character set
The set of characters or symbols that make up a language.
clean print cartridge
Describes the process of removing dried ink from the nozzles of the ink jet cartridge.
configuration
The settings used by the printer to communicate with the computer. Also the internal settings
in the printer that control the print job.
control code
The instructions sent to the printer to describe how to perform the print job.
control panel
The buttons and display that are used to manually change the printers settings.
cpi
See characters per inch.
Revision A
Glossary
9K-L USERS MANUAL
P/N 90-00860-001
Appendix I Glossary
Section I -
1