Bryce 9K-L User Manual page 35

A. Distance
to Right
B. Distance
to Bottom
Revision A
Distance to Right is the distance measured from the
right edge of the media to the first printable character.
See example.
Example:
Use the following steps to change the position of the
record on the media.
• Press the Enter button to select this option.
• Press the + ( MORE ) or - ( LESS ) buttons to
increase / decrease the distance to the right edge of
the media.
Press the Enter button to select the desired
•
measurement.
• Press the Menu button several times to back out of
the Main Menu until the printer displays OFF
LINE.
• Press the On Line button; now the printer is ready
for use.
The Distance to Bottom is the distance between the
bottom edge of the media and the base of the first line
of the address. Minimum distance between the bottom
of the last line of the address and the bottom edge of
the media is 5/8 inches (10.58mm). If less than 5/8
9K-L USERS MANUAL
P/N 90-00860-001
Printer Menu System
Section 6 -
5