Lines Per Address - Bryce 9K-L User Manual

4. LINES PER
ADDRESS
Revision A
Use the following steps to clean the ink jet cartridge nozzles.
+
•
Press the or
Menu options until the 3. PURGE PRINT HEAD
option is displayed on the LCD panel.
•
Press the Enter button to select this option.
+
•
Press the (YES) button to clear the ink jet nozzles or
press the - (NO) button to disable this option.
•
Press the Menu button several times to back out of the
Setup Menu until the printer displays OFF LINE.
•
Press the On Line button; now the printer is ready for
use.
Set the number of lines of text the record will consist of when
printing onto the media. The printer has a range of 1 to 66
lines.
Use the following steps to change the printers number of lines.
+
•
Press the or
Menu options until the 4. LINES PER ADDRESS
option is displayed on the LCD panel.
•
Press the Enter button to select this option.
•
Press the + button (MORE) or - button (LESS) to
match the number of lines being sent to the printer.
Note: Setting the number of lines on the printer is
analogous to a typewriter; figure 6 lines per inch of
text will be printed with single spacing enabled. If
double spacing is enabled then figure 3 lines per
inch of text will be printed.
Commonly used settings:
3 to 8 lines of text are commonly used for
addresses.
66 lines of text are typical of a 8 ½" (21.59cm) X
11" (27.94cm) page document.
9K-L USERS MANUAL
P/N 90-00860-001
Printer Menu System
-
buttons to scroll through the Setup
-
buttons to scroll through the Setup
23
Section 6 -