Adjustment Lever Fine Tuning - Bryce 9K-L User Manual

Adjustment
Lever Fine
Tuning
Note
: If the print
smudges the ink
cartridge is touching
the media. Raise up
the Adjustment Lever
until it stops.
Revision A
The Adjustment Lever changes the distance of the ink jet
cartridge from the media. This gives the printer the ability to
adapt to different types of media. Proper use of the lever
results in clean crisp print. Perform the following steps to get
best quality possible with the printer:
1. Load the media that is going to be used for a job.
2. Raise the Adjustment Lever to the fully opened
position. Reference the Figure below.
3. Press the Test Env. button down. The printer feeds
and prints a test piece.
1. If the print is indistinct, hazy or too light, lower the
lever. Keep lowering the lever and pressing the Test
Env. button until the best print quality is found.
9K-L USERS MANUAL
P/N 90-00860-001
Printer Tips
Section 5 - 2