C. Word
Length
D. Line
Termination
Revision A
Press the On Line button; now the printer is ready
•
for use.
Use the following steps to change the serial
communications word length.
•
Press the Enter button to select this option.
Press the + or - buttons to scroll through the
•
options.
a) 7 DATA BITS
b) 8 DATA BITS
•
Press the Enter button to select the desired option.
•
Press the Menu button several times to back out of
the Setup Menu until the printer displays OFF
LINE.
Press the On Line button; now the printer is ready
•
for use.
The typical software line termination is CR = CR; LF
= LF. If your software is not typical then the Line
Termination can be modified.
Use the following steps to change the line termination.
•
Press the Enter button to select this option.
•
Press the + or - buttons to scroll through the D.
LINE TERMINATION options.
a) (CR = CR; LF= LF)
b) (CR = CR+LF; LF = LF)
c) (CR = CR; LF = CR + LF)
d) (CR = CR + LF; LF = CR + LF)
•
Press the Enter button to select the desired option.
•
Press the Menu button several times to back out of
the Setup Menu until the printer displays OFF
LINE.
Press the On Line button; now the printer is ready
•
for use.
9K-L USERS MANUAL
P/N 90-00860-001
Printer Menu System
Section 6 -
26