Rom Revision - Bryce 9K-L User Manual

9. AUTO ENV.
EJECT
10. ROM
REVISION#
Revision A
•
Press the + button (MORE) or - button (LESS) to
increase or decrease the amount of time before the next
piece is drawn from the input bin. The time delay can
be set from 0.0 to 30 seconds.
•
Press the Enter button to select the desired option.
•
Press the Menu button several times to back out of the
Setup Menu until the printer displays OFF LINE.
•
Press the On Line button; now the printer is ready for
use.
Use this option to automatically eject the last envelope in your
file. Use the following steps to eject a blank piece of media
between batch jobs.
+
•
Press the or
Menu options until the 9. AUTO ENV. EJECT option
is displayed on the LCD panel.
•
Press the Enter button to select this option.
+
•
Press the or
of ON or OFF. When this option is enabled a blank
envelope will be ejected between batch jobs.
•
Press the Enter button to select the desired option.
•
Press the Menu button several times to back out of the
Setup Menu until the printer displays OFF LINE.
•
Press the On Line button; now the printer is ready for
use.
This option is extremely useful whenever it is necessary to
verify the Firmware Revision installed in the printer (i.e. for
CASS certification) or to determine if your printer requires an
upgrade. This also displays the total number of accumulated
print cycles (maintenance count) which is information that can
help to determine solutions to printer problems. Use the
following steps to view this menu.
+
•
Press the or
Menu options until the 10. ROM REVISION option is
displayed on the LCD panel.
9K-L USERS MANUAL
P/N 90-00860-001
Printer Menu System
-
buttons to scroll through the Setup
-
buttons to scroll through the options
-
buttons to scroll through the Setup
32
Section 6 -