Bryce 9K-L User Manual page 143

The Interface Panel
The interface panel is located on the back of the machine. It contains the main power switch, the power
receptacle and fuse. The interface ports (parallel and serial) are the interface connections between the
9K-L and your computer.
1. Connect the line cord from the printer receptacle to a properly grounded outlet box. Do not use
an adapter plug. Avoid using outlets that are controlled by wall switches and shared with other
equipment.
2. Connect the interface cable from the computer to the appropriate connector on the printer
interface panel. The typical cable length is six (6) feet long (182. 9 cm) for parallel and fifteen
(15) feet (457.2 cm) long for serial.
Power Supply Cords (Line Cords)
Appliance inlet is the main disconnect device.
Der Geraetestecker dient zur Trennung der Netzspannung.
"Bei Gefahr Netzstecker ziehen."
In the United Kingdom:
WARNING :- THIS EQUIPMENT MUST BE EARTHED. (GROUNDED.)
The cores in the main leads are colored in accordance with the following code:
- green and yellow
- blue:
- brown
- the lead which is colored green and yellow must be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol, or colored green and yellow.
- the lead which is colored blue must be connected to the terminal which is marked with the letter N or
colored black.
- the lead which is colored brown must be connected to the terminal which is marked with the letter L or
colored red.
In Denmark
Appliances which are delivered without a plug must be provided with a visible tag with the following
text:
Ledern med gron/gul isolation ma kun tilslutters en klemme maerket eller
For tilslutning af de ovrige ledere, se medfolgende installationsvejledning.
In the U.S.A.
A molded three pin plug and socket cable is provided with the printer.
Revision A
earth
neutral
live
Vigtigt!
9K-LC USERS MANUAL
Appendix G Technical Specifications
P/N 90-00870-001
Section G - 4