Installation Of The Wire Form Assembly - Bryce 9K-L User Manual

Installation of
the Wire Form
Assembly
Revision A
1. Turn the Carriage Knob counter-clockwise on the Feed
Carriage Assembly until the end of the Carriage Knob
is no longer visible in the slot for the supporting bar of
the Wire Form Assembly.
Turn Carriage Knob on the Feed Carriage Assembly to clear the way for the Wire Form Assembly support bar.
2. Move the Feed Ramp to the center of the Wire Form.
Turn the Carriage Knob to secure in place.
Position the Feed Ramp to the center of the Wire Form Assembly and fasten in place.
9K-L USERS MANUAL
P/N 90-00860-001
Assembly of Printer Components
2
Section 3 -