Bryce 9K-L User Manual page 76

Introduction
The 9K-L Address Printer emulates the listed PCL 5 printer command codes. The 9K-L Address Printer will
virtually handle media as an HP1200 would using these printer commands. Additional printer commands have
been added to allow control of special printer addressing functions and addressing needs.
The printer command codes are sets of characters that allow your computer software to override the address
printer menu selections as fonts, print quality, etc. so customized address formats can be created.
Code Name Symbol
Line Feed <LF>
Form Feed <FF>
Carriage <CR>
Return
Escape < >
Space <SP>
Revision A
PCL Command Codes
HEX DEC Description
Value Value
0A 10 Causes the printer to advance the paper one line at
current line spacing.
0C 12 Causes the printer to advance the paper to the next top
of form.
0D 13 Causes the printer to move the current print position to
the left margin. Does not cause a paper advance.
1B 27 Indicates to the printer that the characters immediately
following are part of a printer command.
20 32 Causes the printer to move the current print position one
character to the right.
9K-L USERS MANUAL
P/N 90-00860-001
Appendix C PCL Command Codes
Section C - 1