Bryce 9K-L User Manual page 8

Who is this
manual for?
Sections 1 - 3
Sections 4 - 6
Sections 7
Appendices
Revision A
This manual is for the person who is new to the Bryce 9K-L
Address Printer and needs a step by step instructions to setup
and operate the printer.
The appendix at the end of the manual has information for
those who are familiar with the 9K-L printer and simply want
a quick reference or want more specific technical information
on the 9K-L printer.
The first and second chapter introduces you to the components
of the printer and what accessories came with your new
printer. Chapter 3 runs you through the basics of how to install
and remove the parts that came in the accessory box with the
printer.
Once the printer has been assembled some adjustments are
necessary to maximize the performance of the printer. When
working with the address printer these chapters will give you
step by step instructions on what you need to do. It is always a
good idea to read through menu section before running the
printer. This section explains the options that are available to
run a mailing job.
The chapter on Troubleshooting contains a list of possible
problems you may encounter with the printer and their
solutions. Periodically follow the general maintenance steps to
keep the printer clean and functioning properly.
The appendices include a quick reference table for the 9K-L
menus, a listing of the PCL commands the printer recognizes,
a hex chart to help work through a HEX dump, and references
of setting up the most popular software to work with the
printer. The final section has a list of supplies available for
your printer.
9K-L USERS MANUAL
P/N 90-00860-001
Introduction