Power Print For The Macintosh - Bryce 9K-L User Manual

POWER PRINT for the MACINTOSH

PowerPrint by GDT Softworks consists of software printer drivers and a high speed serial-to-
parallel adapter which allows for a virtually transparent connection between your Macintosh and
the BOS 9K-L.
Installation:
Follow the instructions in the User Manual to install PowerPrint. Select the LaserJet 4 printer
driver to install for use with the BOS9K-L.
Activating Your Driver:
•
Go to the Apple menu and select Chooser.
•
Select the LaserJet 4 printer driver.
•
Click on the serial port to which you have the BOS 9K-L connected, either the modem
(phone) or printer icon.
NOTE: If you are connecting your printer cable to the printer port, Appletalk must be set to
"inactive".
• Click on the box labeled Cartridges. A Cartridge Mapping window will be displayed. Map
the following fonts:
Mac Font called Courier to print as the HP Font Courier.
Mac Font called Helvetica to print as the HP Font Arial.
Mac Font called Times to print as the HP Font Times New.
• Click on OK.
•
Close the Chooser by clicking on the close box in the upper left corner. The Address Printer
is now configured to print with the PowerPrint driver.
Printing:
Go to the Setup Menu on the BOS9K-L and turn on Auto Line Feed.
While in an application, go to the File menu and select Page Setup. Select:
•
Paper = US Letter
• Reduce or Enlarge = 100%
•
Page Orientation = Portrait
•
Printer Effects = Fractional Widths
Click on OK
Revision A
Appendix F Printing with Software
9K-L USERS MANUAL
P/N 90-00860-001
Section F - 35