Additional Tools and Materials Required
The GSU is connected to the HSS Unit using a standard HSS cable. It synchronizes the trans-
mission timing of multiple Hub-Sites to the same clock source thus eliminating self interfer-
ence (see
Chapter
10).
Figure 3-9: General GSU configuration
See
Chapter 10
for further details about the use of GSU.
Additional Tools and Materials Required
The following is a list of the equipment and materials required to install RADWIN 5000 HPMP
hardware.
Tools and Materials
•
Crimping tool for RJ-45 (if the ODU-PoE cable is without connectors)
•
Spanner/wrench 13 mm (½")
•
Drill (for wall mounting only)
•
Cable ties
•
Sealing material
Cables and connectors
•
ODU grounding cable 12AWG
RADWIN 5000 HPMP User Manual
Release 3.2.00
Chapter 3
3-7