Rfp: General Radio Frame Pattern; Sector Configuration And Hss - Radwin 5000 HPMP User Manual

RFP: General Radio Frame Pattern

Table 9-5: Legend for Radio Frame Pattern Tables
Item Description
Best fit Optimal RFP choice for TDM and Ethernet services
Available Available RFP for TDM and Ethernet services, but not optima
N/A Service unavailable
Select the RFP that gives you the Best Fit or Available for required system services and
select the channel bandwidth accordingly.
The RFP must be the same for each link within the collocated system.
Note
RFP: General Radio Frame Pattern
When setting the RPF, the following considerations should be borne in mind:
• When synchronizing RADWIN 5000 HBS units you must use RFP E
• When synchronizing RADWIN 5000 HBS with RADWIN 2000 or WinLink 1000 units
you must use RFP E
• RFP influences capacity and latency.
• Using the Link Budget Calculator, you can see the effect of the RFP on the Ethernet
throughput.

Sector Configuration and HSS

The Hub Site Synchronization Settings dialog box appears in both the HBS Site Configuration
window.
RADWIN 5000 HPMP User Manual Release 3.2.00
Chapter 9
9-8