To Obtain/Install Additional Bands - Radwin 5000 HPMP User Manual

Changing the Sector Band
The foregoing applies to both regulated and unregulated Bands.
There is no connection between license fees payable to RADWIN for
additional installed Bands (a hardware feature) and license fees payable to
regulatory authorities for the right to use such Bands (a legal imposition).
Note

To obtain and install additional bands:
1. Make a list of ODU serial numbers for all HBSs and all HSUs to receive additional
bands. The list should be a simple text file, one serial number per line. (The serial
numbers are located on the stickers on the ODUs.)
2. As Installer, open the window of
lowing instruction panel is displayed:
Figure 6-17: Add Bands Instructions Panel
The serial numbers displayed relate to the ODUs in the sector. Click Copy to Clip-
board.
3. This step applies only if you have additional un-installed units:
Before proceeding to step 2 in
If the displayed serial numbers are in the list, select your list and copy it all to the
clipboard. Otherwise append the clipboard contents to your list. Select the whole list
and save it to the clipboard.
4. Now carry out steps 2 to 5 in
which looks something like this:
RADWIN 5000 HPMP User Manual
Figure 6-16 above, and click Add Bands. The fol-
Figure 6-17, open your own list in a plain text editor.
Figure 6-17. Step 2 will take you to a Web page,
Release 3.2.00
Chapter 6
6-35