Configuration Of Vlan Tagging For Ethernet Service - Radwin 5000 HPMP User Manual

Configuration of VLAN Tagging for Ethernet Service

Configuration of VLAN Tagging for Ethernet Service
VLAN configuration is carried out per HSU. It is up to you to ensure consistency between the
HSUs.
HSU VLAN tagging can only be configured from the HBS. You can not log on to an HSU
directly and do it from the HSU main window. The reason is that the HSU maintains the HSU
tagging information in its internal per HSU configuration record.

To set up an HSU for VLAN tagging:
1. Right click an HSU on the HBS window, and then click Configure | Ethernet |
VLAN Configuration. The VLAN Configuration window is displayed:
In Disabled mode, Ethernet frames pass transparently over the radio links.
2. For Provider tagging, click the Provider Radio button:
RADWIN 5000 HPMP User Manual Release 3.2.00
Chapter 12
12-6