Without Hss; Rfp And Hss - Radwin 5000 HPMP User Manual

Without HSS

Without HSS
When selecting Ethernet services, the system automatically and transparently chooses the
optimal RFP.

RFP and HSS

When HSS is used, the RFP for the collocated radios must be selected manually.
RADWIN 5000 HPMP radios use the Time Division Duplex (TDD) mechanism.
Under HSS, TDD enables synchronization of transmission for the collocated units as shown in
Figure 9-9:
Figure 9-9: Radio Frame Pattern
Five RFP types (A to E) are available. Under HSS the RFP must be configured by the user
depending on the type of the radio products, services and channel bandwidth in accordance
with the Table 9-3 and
The tables describe the efficiency of the air interface according to the RFP type, radio prod-
ucts mix, services and channel bandwidth. The tables may also be viewed in the RADWIN
Manager and in the Link Budget Calculator. The efficiency of the air interface will vary accord-
ing to the product used
Table 9-2: Radio Frame Pattern Table - RADWIN 5000 HBS
5/10/20/40 MHz
RFP
TDM Ethernet
E N/A Best fit
Table 9-3: Radio Frame Pattern Table - RADWIN 2000
40 MHz
RFP
TDM Ethernet
B Available Available
E Best fit Best fit
Table 9-4: Radio Frame Pattern Table - WinLink 1000
20 MHz
RPF
TDM Ethernet
A Best fit Best fit
B N/A N/A
C N/A N/A
D N/A N/A
E Available Available
RADWIN 5000 HPMP User Manual
Table 9-4.
.
20 MHz
TDM Ethernet
Available Available
Best fit Best fit
10 MHz
TDM Ethernet
Available Available
Best fit Available
N/A Best fit
N/A N/A
Available Available
Release 3.2.00
10 MHz
TDM Ethernet
Available Available
Best fit Best fit
5 MHz
TDM Ethernet
N/A N/A
Best fit Available
N/A Available
N/A Best fit
N/A N/A
Chapter 9
5 MHz
TDM Ethernet
Best fit Best fit
Available Available
9-7