Setting Up An Hsu For Qos - Radwin 5000 HPMP User Manual

Setting up an HSU for QoS

If you un-check a queue, it will be disabled for the sector. It will not prevent the HSU from
configuring it as "live". The purpose behind this is to avoid the necessity of reconfiguring QoS
for each HSU, should the queue be reinstated.
Setting up an HSU for QoS
QoS setup for an HSU is carried out from the HBS.

To configure an HSU for QoS:
1. Right click an HSU in the HBS manager HSU window, and choose Configuration.
2. Open the Ethernet tab and click QoS Configuration. The following window is dis-
played:
RADWIN 5000 HPMP User Manual Release 3.2.00
Chapter 15
15-3