Pre-configuring from a Direct Link
Click Yes.
6. Return to the HSU context menu
parameters for the HSU are now displayed:
7. Repeat the last six steps for each HSU in the sector.
Pre-configuring from a Direct Link
This method is used to pre-configure an HSU in the field during physical installation. Our
example below were captured using a laptop running Windows 7, so the window styles may
look a little different from those in the previous section.
To pre-configure an HSU for service by direct link:
1. Connect your managing computer to the HSU and log on using Local Connection.
RADWIN 5000 HPMP User Manual
(Figure
5-8). Click Reset. The newly entered
Release 3.2.00
Chapter 5
5-22