Replacing an HSU
•
You are logged on as Installer
For this release, this feature for HSUs, is relevant to the 5.3 GHz ETSI and the 5.4 GHz FCC/
IC bands.
Configuration of False Radar Mitigation is covered in
Replacing an HSU
A defective HSU may be replaced by another HSU belonging to the sector provided that the
replacement is not registered. Here is a typical scenario:
Figure 6-15: Unit 10.101 is down and unit 10.102 is available and not registered
Since the replacement procedure is a rather delicate process, we will step through it with a
detailed example based on the scenario in
To replace a defective HSU:
1. Right click the defective unit to obtain the context menu.
It has a new item: Replace.
2. Click Replace. Your are offered a list of HSUs available as replacements. In our
example there is one: 10.102.
RADWIN 5000 HPMP User Manual
Chapter
Figure
6-15.
Release 3.2.00
Chapter 6
13.
6-29