Pre-Configuring The Hsus For Service; Pre-Configuration From The Hbs - Radwin 5000 HPMP User Manual

Pre-configuring the HSUs for Service

Pre-configuring the HSUs for Service
The HSU activities described in this section, may be carried out any time - regardless of
whether or not the HSU is registered for service or not. These activities include among other
things, setting the Location, Contact and Name. We have chosen to do them here since they
reflect the workflow required to set up an operational sector. There are two methods of pre-
configuration.

Pre-configuration from the HBS


To pre-configure an HSU for service from the HBS:
1. Right click an HSU to get its context menu:
Figure 5-8: HSU Context menu
2. Click Configure. The Configuration dialog is displayed. Enter a Name Contact and
Location:
RADWIN 5000 HPMP User Manual
p
Release 3.2.00
Chapter 5
5-18