Hub Site Sync [Hss] - Radwin 5000 HPMP User Manual

Hub Site Sync [HSS]

Hub Site Sync [HSS]
The External Pulses detected in this example, come from a collocated RADWIN 2000 ODU
configured as Hub Sync Master. (A WinLink 1000 would have done just as well.) To enable
HSS, check the Enabled check box.
Ensure that the correct Operational state is selected - in our example, Hub Site Client -
Continue Tx. Click Apply or OK to enable HSS.
.See Chapter 9 for further detail about HSS.
RADWIN 5000 HPMP User Manual Release 3.2.00
Chapter 6
6-5