Introduction
The following table describes the significance of each LED:
See
Base Station Indications (Cordless Models ONLY) on page 333
the LEDs.
Base Button
The Base contains a button which is used primarily to perform a paging function. Pressing the
button causes a sound signal to be emitted by all scanners linked with this Base, as long as the
scanner is awake (see
Mode Timeout on page
Datalogic Aladdin Software tool (available for free download from the Datalogic website). See
the Aladdin Online Help for details.
See
Base Station Indications (Cordless Models ONLY) on page 333
Base Button functions.
BC40XX UV Counterfeit Detection
The BC40XX Radio Base is available with a UV Counterfeit Money Detector, typically used to
verify the authenticity of bank notes. Other uses for counterfeit detection are passport, ticket,
credit card, travelers' check and similar applications where it is possible to detect fluorescent
marks with UV light.
The detector contains eight special UV LEDs, as shown below:
12
LED
Power on / Data
Charging
Charge completed
Charging + Charge completed
Powerdown Timeout on page
94). The button can also be used to "force device connection" via the
STATUS
Yellow On = Base is powered
Yellow Blinking = Base receives data and
commands from the Host or the Reader.
Red On = Battery charging is in progress.
Green On = the Battery is completely charged.
Red and Green Blinking together = the Reader is not
correctly placed onto the Base.
266) and reception is enabled (see
UV LEDs
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
for more specific details on
Sleep
for further information on