Datalogic Gryphon I GD4100 Product Reference Manual page 26

Setup
Figure 10. Arrows showing routing
Host Connection:
host equipment. Most connections plug directly into the host device as shown below. Keyboard
Wedge interface cables have a 'Y' connection where its female end mates with the male end of
the cable from the keyboard and the remaining end at the keyboard port on the terminal/PC.
Figure 11. Connecting to the Host
Power Connection :
facing downwards (as shown in
Disconnecting the Cable:
on the base, as shown in
24
Verify before connection that the reader's cable type is compatible with your
or...
or...
or...
Plug the AC Adapter in to an approved AC wall socket with the cable
Figure
Gryphon Mobile can also be Powered by the Terminal. The external power supply is rec-
ommended but not necessary. When powered by the Terminal, the battery charger is
automatically set as Slow charge.
To detach the cable, insert a paper clip or similar object into the hole
Figure 12.
8) to prevent undue strain on the socket.
Gryphon™ I GD4100/GM4100/GBT 4100/L GD4300