Codabar Set Length 2 - Datalogic Gryphon I GD4100 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Codabar Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. The length includes the barcode's start, stop, check and data characters. The length must
include at least one data character.
The length can be set from 3 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
setting this feature.
Table 17. Codabar Length 2 Setting Examples
STEP ACTION
Desired Setting (and pad with
1
leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Codabar Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
Variable Length
17
provides examples for setting Length 2. See
00 Ignore This
Length
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODABAR LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Codabar Length
Mode, or the second fixed length if in
page 303
EXAMPLES
07 Characters 15 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Codabar Set Length 2
Control. Length 2 is the
Fixed Length
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
205