I 2 Of 5 Set Length 1 - Datalogic Gryphon I GD4100 Product Reference Manual

Interleaved 2 of 5 (I 2 of 5)

I 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for
minimum label length if in
Mode. The length includes the barcode's check and data characters. The length can be set from
2 to 50 characters in increments of two.
Table
setting this feature.
Table 8. I 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
174
Variable Length
8
provides some examples for setting Length 1. See
2 Characters
02
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT I 2 of 5 LENGTH 1 SETTING
'0' and '2'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
I 2 of 5 Length
Mode, or the first fixed length if in
page 302
EXAMPLES
6 Characters 14 Characters
06
'0' and '6'
06 = Length 1 is 6 Characters
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Control. Length 1 is the
Fixed Length
for detailed instructions on
50 Characters
14 50
'1' and '4' '5' AND '0'
CANCEL